Cisco Security Connector: Umbrella Setup Guide

Suggest Edits

👍
The Cisco Security Connector: Umbrella Setup Guide only explains how to configure the Umbrella portion of the Cisco Security Connector (CSC). For information about how to configure your Mobile Device Manager (MDM) system, see your MDM system’s documentation.
The Cisco Security Connector is only supported for DNS policies.

The Cisco Security Connector provides visibility and control for organization-owned and MDM managed mobile Apple iOS devices, such as iPhones and iPads. The CSC's Umbrella component directs DNS traffic to the Cisco Umbrella cloud where filtering against malicious sites, such as phishing sites or sites that exfiltrate information, takes place.

The CSC’s Umbrella portion does not require an on-demand or always-on VPN or a full proxy to gain complete visibility and control through cloud security (not locally on the device). This makes for both easier management and simpler, more effective security.

Note: Your iOS mobile device must be managed by a MDM system.

Note: Remote Browser Isolation (RBI), which protects identities by redirecting browsing to a cloud-based host, is not supported on mobile devices running iOS or Android.

For more information about the Cisco Security Connector, see Cisco Security Connector.

Requirements

For the Cisco Security Connector:

iOS device must be running iOS 15.0 or higher OR must be running in supervised mode with iOS 13.2 or higher.
iOS device must be managed by a Mobile Device Manager (MDM) system and use one of the following Apple device managers:
- Apple School Manager
- Apple Business Manager
Five MB free space.

One of the following MDM systems:

Meraki System Manager (SM) with API access enabled
Note: Only System Manager and Combined network types are supported.
Apple Configurator 2.5 or higher
IBM MaaS360
Intune
Jamf
MobiConnect
MobileIron Enterprise Mobility Management (EMM) On-Prem and Cloud versions 9.4 or higher
Workspace ONE
Generic—Other MDMs may be used to manage your organization-owned iOS mobile device; however, success results may vary. For more information, see Register an iOS Device Through a Generic MDM System.
For information about configuring your specific MDM system, see your MDM system’s documentation or contact your MDM's support team.

You will also need:

Cisco Umbrella account.
Direct access to the IPv4 IP addresses 18.252.251.72 or 18.254.118.193 is required for IPv4 DNS protection on ports 53 and 443.
The device must be able to communicate with devices.api.umbrellagov.comand and gateway.id.swg.umbrellagov.com for registration and validation purposes at least once a day—when actively used—otherwise, the device cannot be protected.
Depending on the MDM, you may also require each device's serial number.

Optionally

Cisco Secure Endpoint. For more information, see Cisco Secure Endpoint.

Getting Started

For a quick explanation of how to protect your iOS device with Umbrella through CSC, see Quick Start.

For MDM specific Umbrella procedures, see:

👍
For information about configuring your specific MDM system, see your MDM system’s documentation.

Cisco Security Connector: Umbrella Setup Guide > Quick Start

Updated 1 day ago