Import the Digicert Certificate Authority
The ASA registers with Umbrella over HTTPS, which requires that you install a DigiCert intermediate certificate. You can import the certificate manually by pasting the certificate into the terminal.
Prerequisites
- For more information about prerequisites, see Prerequisites.
Procedure
- Create a trustpoint for the Umbrella registration server. You can use any name you want for the trustpoint (up to 128 characters), such as ctx1 or umbrella_server.
ciscoasa(config)# crypto ca trustpoint ctx1
- Indicate that you want to manually enroll by pasting the certificate.
ciscoasa(config-ca-trustpoint)# enrollment terminal
- Import the certificate.
Enter the name of the trustpoint you created for this certificate. Follow the prompts and paste the base-64 encoded certificate, ending with the word "quit". Do not include the BEGIN CERTIFICATE and END CERTIFICATE lines.
ciscoasa(config-ca-trustpoint)# crypto ca authenticate ctx1
The following is the certificate to copy and paste:
-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
The command displays a message indicating that the certificate was successfully imported.
To confirm that your device trusts the correct certificate, verify that the imported certificate includes the following:
- Common Name—DigiCert Global Root G2
- Serial—033af1e6a711a9a0bb2864b11d09fae5
Prerequisites < Import the Digicert Certificate Authority > Configure the Umbrella Connector
Updated 5 months ago